api/driverapi.js

@@ -5,390 +5,25 @@ let api = {
 
 	// 公共key
 	baseUrl: variable.baseUrl,
-
-
-	user_login: '/user/login', // 登录
-	selFs_time: '/selFs/time', //主页查看施肥机历史数据
-	user_logout: '/user/logout', //退出
-	user_upload: '/user/upload', //上传logo
-	update_user: "/api/update/user", //用户更新个人信息，修改昵称密码等
-	sel_user: "/api/sel/user", //根据id查询用户信息
-	getFs_rtdata: "/getFs/rtdata", //主页查看施肥机实时数据
-	selFs_time: "/selFs/time", //主页查看施肥机历史数据
-	sel_eqbyid: "/sel/eqbyid/", //根据用户id查询对应的设备数据
-	chart_fsdata: "/chart/fsdata", //实时数据折线图
-	user_update_pwd: "/user/update/pwd", //用户修改密码
-
-	readFs_state: "/readFs/state", //根据设备ID获取实时数据
-	writeFs: "/writeFs", //根据设备ID获取实时数据
-	readFs_reg: "/readFs/reg", //根据设备ID获取实时数据
-	readJinHuaControl_reg: "/readJinHuaControl/reg", //读取所有寄存器的状态值
-	writeJinHuaControl_write: "/writeJinHuaControl/write", //控制器写入数据（金华）
-	getcontrol_rtdata: "/getcontrol/rtdata", //主页查看控制器实时数据
-	getcontrol_fsdata: "/getcontrol/fsdata", //控制器实时数据折线图
-
-	getcontrol_cpermission: '/getcontrol/cpermission', //根据设备id查询控制器权限
-	getControl_getState: '/readControl/getState', //控制器 设备运行状态
-	getReadControlliShuiControl: '/readControl/liShuiControl', //控制器 顶模和风机
-
-
-	//countType计算类型 0是原数据 1是原数据-400 2是原数据/10 3是(原数据-400) / 10 4是(原数据-1000)/10
-	typeList: [{
-			label: '无意义的传感器',
-			value: 0,
-			countType: 0,
-			unit: ''
-		},
-		{
-			label: '空气温度',
-			value: 1,
-			countType: 3,
-			unit: '℃'
-		},
-		{
-			label: '空气湿度',
-			value: 2,
-			countType: 2,
-			unit: '%'
-		},
-		{
-			label: '光亮度',
-			value: 3,
-			countType: 2,
-			unit: 'Klux'
-		},
-		{
-			label: '二氧化碳',
-			value: 4,
-			countType: 0,
-			unit: 'ppm'
-		},
-		{
-			label: '土壤温度',
-			value: 5,
-			countType: 3,
-			unit: '℃'
-		},
-		{
-			label: '土壤湿度',
-			value: 6,
-			countType: 2,
-			unit: '%'
-		},
-		{
-			label: '水温',
-			value: 7,
-			countType: 3,
-			unit: '℃'
-		},
-		{
-			label: '水肥PH',
-			value: 8,
-			countType: 2,
-			unit: ''
-		},
-		{
-			label: '水肥EC',
-			value: 9,
-			countType: 2,
-			unit: 'mS/cm'
-		},
-		{
-			label: '压差',
-			value: 10,
-			countType: 0,
-			unit: 'Pa'
-		},
-		{
-			label: '风速',
-			value: 11,
-			countType: 2,
-			unit: 'm/s'
-		},
-		{
-			label: '风向',
-			value: 12,
-			countType: 0,
-			unit: '°'
-		},
-		{
-			label: '雨雪信号',
-			value: 13,
-			countType: 0,
-			unit: ''
-		},
-		{
-			label: '降雨量',
-			value: 14,
-			countType: 2,
-			unit: 'mm'
-		},
-		{
-			label: '光合有效辐射',
-			value: 15,
-			countType: 2,
-			unit: 'umol/m2.s'
-		},
-		{
-			label: '太阳总辐射',
-			value: 16,
-			countType: 0,
-			unit: 'W/m2'
-		},
-		{
-			label: '流量',
-			value: 17,
-			countType: 0,
-			unit: 'L/H'
-		},
-		{
-			label: '大气压强',
-			value: 18,
-			countType: 2,
-			unit: 'KPa'
-		},
-		{
-			label: '土壤PH',
-			value: 19,
-			countType: 2,
-			unit: ''
-		},
-		{
-			label: '土壤EC',
-			value: 20,
-			countType: 0,
-			unit: 'uS/cm'
-		},
-		{
-			label: '叶面温度',
-			value: 21,
-			countType: 3,
-			unit: '℃'
-		},
-		{
-			label: '叶面湿度',
-			value: 22,
-			countType: 2,
-			unit: '%'
-		},
-		{
-			label: '果实直径',
-			value: 23,
-			countType: 0,
-			unit: 'mm'
-		},
-		{
-			label: '茎秆直径',
-			value: 24,
-			countType: 0,
-			unit: 'mm'
-		},
-		{
-			label: '流速',
-			value: 25,
-			countType: 2,
-			unit: 'm/s'
-		},
-		{
-			label: '瞬时流量',
-			value: 26,
-			countType: 2,
-			unit: 'm3'
-		},
-		{
-			label: '当日流量',
-			value: 27,
-			countType: 2,
-			unit: 'T'
-		},
-		{
-			label: '累计流量',
-			value: 28,
-			countType: 0,
-			unit: 'T'
-		},
-		{
-			label: '无线气象站电池电压',
-			value: 29,
-			countType: 2,
-			unit: 'V'
-		},
-		{
-			label: '无线气象站无线信号强度',
-			value: 30,
-			countType: 1,
-			unit: 'dBm'
-		},
-		{
-			label: '无线气象站信噪比（SNR）',
-			value: 31,
-			countType: 1,
-			unit: 'dB'
-		},
-		{
-			label: 'PM1.0',
-			value: 32,
-			countType: 0,
-			unit: 'μg/m2'
-		},
-		{
-			label: 'PM2.5',
-			value: 33,
-			countType: 0,
-			unit: 'μg/m2'
-		},
-		{
-			label: 'PM10',
-			value: 34,
-			countType: 0,
-			unit: 'μg/m2'
-		},
-		{
-			label: '紫外辐射',
-			value: 35,
-			countType: 0,
-			unit: 'W/m2'
-		},
-		{
-			label: '蒸发量',
-			value: 36,
-			countType: 2,
-			unit: 'mm'
-		},
-		{
-			label: '负氧离子',
-			value: 37,
-			countType: 0,
-			unit: '个/cm3'
-		},
-		{
-			label: '露点温度',
-			value: 38,
-			countType: 3,
-			unit: '℃'
-		},
-		{
-			label: '设备电压',
-			value: 39,
-			countType: 2,
-			unit: 'V'
-		},
-		{
-			label: '设备电流',
-			value: 40,
-			countType: 2,
-			unit: 'A'
-		},
-		{
-			label: '土壤氮含量',
-			value: 41,
-			countType: 0,
-			unit: 'mg/kg'
-		},
-		{
-			label: '土壤磷含量',
-			value: 42,
-			countType: 0,
-			unit: 'mg/kg'
-		},
-		{
-			label: '土壤钾含量',
-			value: 43,
-			countType: 0,
-			unit: 'mg/kg'
-		},
-		{
-			label: '管道压力',
-			value: 44,
-			countType: 0,
-			unit: 'Kpa'
-		},
-		{
-			label: '一氧化碳',
-			value: 45,
-			countType: 0,
-			unit: 'ppm'
-		},
-		{
-			label: '氨气',
-			value: 46,
-			countType: 0,
-			unit: 'ppm'
-		},
-		{
-			label: '硫化氢',
-			value: 47,
-			countType: 0,
-			unit: 'ppm'
-		},
-		{
-			label: '氧气',
-			value: 48,
-			countType: 2,
-			unit: '%vol'
-		},
-		{
-			label: '土壤张力',
-			value: 49,
-			countType: 4,
-			unit: 'KPa'
-		},
-		{
-			label: '铜（CU）',
-			value: 50,
-			countType: 0,
-			unit: 'mg/kg'
-		},
-		{
-			label: '镉（CD）',
-			value: 51,
-			countType: 2,
-			unit: 'mg/kg'
-		},
-		{
-			label: '铅（PB）',
-			value: 52,
-			countType: 0,
-			unit: 'mg/kg'
-		},
-		{
-			label: '噪声',
-			value: 53,
-			countType: 0,
-			unit: 'dB'
-		},
-		{
-			label: '叶面面积',
-			value: 54,
-			countType: 0,
-			unit: 'mm'
-		},
-		{
-			label: '虫数量',
-			value: 55,
-			countType: 0,
-			unit: '个'
-		},
-		{
-			label: '无线传感器电池电压',
-			value: 56,
-			countType: 2,
-			unit: 'V'
-		},
-		{
-			label: '无线传感器无线信号强度',
-			value: 57,
-			countType: 1,
-			unit: 'dBm'
-		},
-		{
-			label: '无线传感器信噪比（SNR）',
-			value: 58,
-			countType: 1,
-			unit: 'dB'
-		},
-	]
+	
+	
+	user_login:'/user/login',// 登录
+	selFs_time:'/selFs/time',//主页查看施肥机历史数据
+	user_logout:'/user/logout',//退出
+	user_upload:'/user/upload',//上传logo
+	update_user:"/api/update/user",//用户更新个人信息，修改昵称密码等
+	sel_user:"/api/sel/user",//根据id查询用户信息
+	getFs_rtdata:"/getFs/rtdata",//主页查看施肥机实时数据
+	selFs_time:"/selFs/time",//主页查看施肥机历史数据
+	sel_eqbyid:"/sel/eqbyid/",//根据用户id查询对应的设备数据
+	chart_fsdata:"/chart/fsdata",//实时数据折线图
+	user_update_pwd:"/user/update/pwd",//用户修改密码
+	
+		readFs_state:"/readFs/state",//根据设备ID获取实时数据
+	writeFs:"/writeFs",//根据设备ID获取实时数据
+	readFs_reg:"/readFs/reg",//根据设备ID获取实时数据
+	readJinHuaControl_reg:"/readJinHuaControl/reg",//读取所有寄存器的状态值
+	writeJinHuaControl_write:"/writeJinHuaControl/write",//控制器写入数据（金华）
+	
 }
-
-
-export default api
+export default api

pages/controller/controller.vue

@@ -2,10 +2,10 @@
 	<view class="controller">
 		<u-navbar :background="background" :is-back='true' back-icon-color='#FFFFFF' :border-bottom="false" title="控制器"
 			title-color='#FFFFFF' :title-bold='true' title-size='32'></u-navbar>
-		<!-- 金华权限 -->
-		<view class="content" v-if="purviewList.indexOf('10')!=-1">
+
+		<view class="content">
 			<div class="item">
-				<u-collapse :accordion='false' :item-style="itemStyle" :head-style='headStyle'>
+				<u-collapse :item-style="itemStyle" :head-style='headStyle'>
 					<u-collapse-item :title="item.head" v-for="(item,index) in itemList" :key="index" align="center">
 						<view class="collapseItem">
 							<view class="line"></view>
@@ -25,16 +25,14 @@
 								<view class="roll_input">
 									<view class="">
 										<view class="">
-											<input v-model="item.open_value"
-												@blur="blurChangeData00_1(item.type+1,$event)" type="number"
+											<input v-model="item.open_value" @blur="blurChangeData00_1(item.type+1,$event)" type="number"
 												placeholder="0">
 										</view>
 										<text>通道打开;</text>
 									</view>
 									<view class="">
 										<view class="">
-											<input v-model="item.close_value"
-												@blur="blurChangeData00_2(item.type+2,$event)" type="number"
+											<input v-model="item.close_value" @blur="blurChangeData00_2(item.type+2,$event)" type="number"
 												placeholder="0">
 										</view>
 										<text>通道关闭</text>
@@ -46,185 +44,6 @@
 				</u-collapse>
 			</div>
 		</view>
-
-		<!-- 丽水权限 -->
-		<view class="content" v-if="purviewList.indexOf('9')!=-1">
-			<view class="lishui-item">
-				<view class="lishui-title">
-					<view class="title-left">
-						{{ fanStatus.name }}
-					</view>
-					<view class="title-right" @click="fanmodelShow=true">
-						设置
-						<image src="../../static/set-arrow.png" mode=""></image>
-					</view>
-				</view>
-				<view class="lishui-content" v-if="fanStatus.open != 0">
-					<view class="lishui-set">
-						<view class="set-1">
-							<image v-if="fanStatus.open == 1" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>自动控制</span>
-						</view>
-						<view class="set-2">
-							<image v-if="fanStatus.open != 1" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>手机控制</span>
-						</view>
-					</view>
-					<view class="lishui-grid">
-						<view class="btn " :class="fanStatus.status[0] == 1 ? 'btn-on' : 'btn-off'">
-							<image class="fan-img" v-if="fanStatus.status[0] == 1" src="../../static/fan-on.png" alt="">
-							</image>
-							<image v-else src="../../static/fan-off.png" alt=""></image>
-							<span>1#风机</span>
-						</view>
-						<view class="btn" :class="fanStatus.status[1] == 1 ? 'btn-on' : 'btn-off'">
-							<image class="fan-img" v-if="fanStatus.status[1] == 1" src="../../static/fan-on.png" alt="">
-							</image>
-							<image v-else src="../../static/fan-off.png" alt=""></image> <span>2#风机</span>
-						</view>
-						<view class="btn" :class="fanStatus.status[2] == 1 ? 'btn-on' : 'btn-off'">
-							<image class="fan-img" v-if="fanStatus.status[2] == 1" src="../../static/fan-on.png" alt="">
-							</image>
-							<image v-else src="../../static/fan-off.png" alt=""></image> <span>3#风机</span>
-						</view>
-						<view class="btn" :class="fanStatus.status[3] == 1 ? 'btn-on' : 'btn-off'">
-							<image class="fan-img" v-if="fanStatus.status[3] == 1" src="../../static/fan-on.png" alt="">
-							</image>
-							<image v-else src="../../static/fan-off.png" alt=""></image> <span>4#风机</span>
-						</view>
-						<view class="btn" :class="fanStatus.status[4] == 1 ? 'btn-on' : 'btn-off'">
-							<image class="fan-img" v-if="fanStatus.status[4] == 1" src="../../static/fan-on.png" alt="">
-							</image>
-							<image v-else src="../../static/fan-off.png" alt=""></image> <span>5#风机</span>
-						</view>
-					</view>
-				</view>
-				<view v-else class="status-noTrue">
-					<image src="../../static/noTrue.png" mode=""></image>
-					<span>当前设备无效</span>
-				</view>
-			</view>
-
-			<view class="lishui-item" v-for="item, index in statusList" :key="index">
-				<view class="lishui-title">
-					<view class="title-left">
-						{{ item.name }}
-					</view>
-					<view class="title-right" @click="openModelShow(index)">
-						设置
-						<image src="../../static/set-arrow.png" mode=""></image>
-					</view>
-				</view>
-				<view class="lishui-content" v-if="item.open != 0">
-					<view class="lishui-set">
-						<view class="set-1">
-							<image v-if="item.open == 1" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>自动控制</span>
-						</view>
-						<view class="set-2">
-							<image v-if="item.open != 1" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>手机控制</span>
-						</view>
-					</view>
-					<view class="lishui-status">
-						{{ getNumberStatus(item.index) }}:
-						<span>{{ item.progress }}%</span>
-					</view>
-				</view>
-				<view v-else class="status-noTrue">
-					<image src="../../static/noTrue.png" mode=""></image>
-					<span>当前设备无效</span>
-				</view>
-			</view>
-		</view>
-		<u-popup v-model="modelShow" mode="center" :mask-close-able='true' width="640rpx" height="350rpx"
-			:closeable='false'>
-			<view class="contentPop lishui-item">
-				<view class="contentPop_box">
-					<view class="title">
-						顶卷膜{{indexs}}
-					</view>
-				</view>
-				<view class="lishui-content">
-					<view class="model-title">
-						控制模式:
-					</view>
-					<view class="lishui-flex">
-						<view class="btn btn-140 " @click="changeOpen1(1)" :class="openIndex1==1?'btn-on':'btn-off'">
-							<span>自动运行</span>
-						</view>
-						<view class="btn btn-140 " @click="changeOpen1(2)" :class="openIndex1==2?'btn-on':'btn-off'">
-							<span>手动打开</span>
-						</view>
-						<view class="btn btn-140 " @click="changeOpen1(3)" :class="openIndex1==3?'btn-on':'btn-off'">
-							<span>手动关闭</span>
-						</view>
-						<view class="btn btn-110 " @click="changeOpen1(4)" :class="openIndex1==4?'btn-on':'btn-off'">
-							<span>停止</span>
-						</view>
-					</view>
-				</view>
-
-				<image src="../../static/closed.png" mode="" @click="modelShow=false"></image>
-			</view>
-		</u-popup>
-		<u-popup v-model="fanmodelShow" mode="center" :mask-close-able='true' width="640rpx" height="550rpx"
-			:closeable='false'>
-			<view class="contentPop lishui-item">
-				<view class="contentPop_box padding-none">
-					<view class="title">
-						{{fanStatus.name}}
-					</view>
-				</view>
-				<view class="lishui-content padding-none">
-					<view class="lishui-set">
-						<view class="set-1" @click="changeOpen(1)">
-							<image v-if="openIndex == 1" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>自动运行</span>
-						</view>
-						<view class="set-2" @click="changeOpen(2)">
-							<image v-if="openIndex == 2" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>手动打开</span>
-						</view>
-						<view class="set-3" @click="changeOpen(3)">
-							<image v-if="openIndex == 3" class="sel" src="../../static/sel.png" mode=""></image>
-							<view v-else class="sel-no"></view>
-							<span>手动关闭</span>
-						</view>
-					</view>
-					<view class="model-title" style="padding:30rpx 0 0 30rpx;">
-						手动打开时，开几号风机：
-					</view>
-					<view class="lishui-grid">
-						<view class="btn" @click="changeIndexOpen(0)" :class="actList1[0]=='1'?'btn-on':'btn-off'">
-							<span>一号风阻</span>
-						</view>
-						<view class="btn" @click="changeIndexOpen(1)" :class="actList1[1]=='1'?'btn-on':'btn-off'">
-							<span>二号风阻</span>
-						</view>
-						<view class="btn" @click="changeIndexOpen(2)" :class="actList1[2]=='1'?'btn-on':'btn-off'">
-							<span>三号风阻</span>
-						</view>
-						<view class="btn" @click="changeIndexOpen(3)" :class="actList1[3]=='1'?'btn-on':'btn-off'">
-							<span>四号风阻</span>
-						</view>
-						<view class="btn" @click="changeIndexOpen(4)" :class="actList1[4]=='1'?'btn-on':'btn-off'">
-							<span>五号风阻</span>
-						</view>
-					</view>
-				</view>
-				<image src="../../static/closed.png" mode="" @click="fanmodelShow=false"></image>
-			</view>
-		</u-popup>
-		<view class="content" v-if="!purviewList.length" style="text-align: center;">
-			暂无权限查看
-		</view>
 	</view>
 </template>
 
@@ -241,28 +60,28 @@
 				itemList: [{
 					head: "1#顶卷膜",
 					type: 21680,
-					open_value: 0,
-					close_value: 0
+					open_value:0,
+					close_value:0
 				}, {
 					head: "2#顶卷膜",
 					type: 21683,
-					open_value: 0,
-					close_value: 0
+					open_value:0,
+					close_value:0
 				}, {
 					head: "3#顶卷膜",
 					type: 21686,
-					open_value: 0,
-					close_value: 0
+					open_value:0,
+					close_value:0
 				}, {
 					head: "1#侧卷膜",
 					type: 21689,
-					open_value: 0,
-					close_value: 0
+					open_value:0,
+					close_value:0
 				}, {
 					head: "2#侧卷膜",
 					type: 21692,
-					open_value: 0,
-					close_value: 0
+					open_value:0,
+					close_value:0
 				}, ],
 				itemStyle: {
 					width: "690rpx",
@@ -288,35 +107,16 @@
 				inputData1: [],
 				timer: '',
 
-				purviewList: [], //权限的list
-				typeList: [],
-				statusList: [],
-				statusInterval: null, //状态接口调取
-				fanStatus: {
-					name: '风机',
-					open: 0,
-					status: []
-				},
-				indexs: 1, //弹窗打开的顶卷膜index
-				openIndex1: 0, //顶卷膜的index
-				modelShow: false, //顶卷膜show
-				fanmodelShow: false, //风机show
-				openIndex: 0, //风机有效性
-				inputData2: [],
-				actList1: [],
+				
 			};
 		},
 		onLoad(options) {
-			this.typeList = this.api.typeList
 			if (options.id) {
 				this.deviceId = options.id;
 			}
 
 			this.dataInit()
 		},
-		beforeDestroy() {
-			clearInterval(this.statusInterval) && this.statusInterval
-		},
 		onPullDownRefresh() {
 			uni.showLoading({
 				title: '加载中...'
@@ -324,208 +124,49 @@
 			this.dataInit();
 		},
 		methods: {
-			//开启几号风机
-			changeIndexOpen(active) {
-				if (this.actList1[active] == '1') {
-					this.actList1[active] = '0'
-				} else {
-					this.actList1[active] = '1'
-				}
-				var revList = this.actList1.slice().reverse()
-				var num = revList.join("");
-				var dataNum = {
-					target: {
-						value: parseInt(num, 2),
-					},
-				};
-				this.changeBtn('21601', dataNum);
-			},
-			//风机有效性修改
-			changeOpen(index) {
-				this.openIndex = index
-				var dataNum = {
-					target: {
-						value: this.openIndex,
-					},
-				};
-				this.changeBtn('21600', dataNum);
-			},
-			//顶卷膜修改
-			    changeOpen1(index) {
-			      this.openIndex1 = index
-			      var dataNum = {
-			        target: {
-			          value: this.openIndex1,
-			        },
-			      };
-			      this.changeBtn(21613 + ((this.indexs - 1) * 11), dataNum);
-			    },
-			       changeBtn(code, el) {
-			          
-			            var data = {
-			                equipmentId: this.deviceId,
-			                regAddress: code,
-			                num: el.target.value,
-			            };
-			            this.delayTimerBtn(0, data);
-			        },
-			        //切换btn的限制 写入停止后j*100毫秒调取函数
-			        delayTimerBtn(i, data) {
-			            const that = this;
-			            //整体接口
-			            let j = 10;
-			            //避免开启多个计时器
-			            this.timer && clearInterval(this.timer);
-			
-			            this.timer = setInterval(() => {
-			                ++i;
-			                if (i == j) {
-			                    that.changeData(data);
-			                    clearInterval(this.timer);
-			                }
-			            }, 100);
-			        },
-			//打开顶卷膜的弹窗
-			openModelShow(index) {
-				this.indexs = index + 1
-				this.modelShow = true
-
-				this.openIndex1 = this.inputData2[21613 + ((this.indexs - 1) * 11)]
-			},
 			// 根据type参数返回对应的txt_act21680
-			getTypeRoll(i) {
-				if (i == 21680) {
+			getTypeRoll(i){
+				if(i == 21680){
 					return this.txt_act21680
-				} else if (i == 21683) {
+				}else if(i == 21683){
 					return this.txt_act21683
-				} else if (i == 21686) {
+				}else if(i == 21686){
 					return this.txt_act21686
-				} else if (i == 21689) {
+				}else if(i == 21689){
 					return this.txt_act21689
-				} else if (i == 21692) {
+				}else if(i == 21692){
 					return this.txt_act21692
 				}
 			},
-
-
+			
+			
 			// 读取所有寄存器的状态值
 			dataInit() {
 				var deviceId = this.deviceId
 				this.$http({
-					url: this.api.getcontrol_cpermission + '?deviceId=' + deviceId,
+					url: this.api.readJinHuaControl_reg + '?deviceId=' + deviceId,
 					method: 'POST',
-				}).then((res => {
-					res.data.forEach((el, index) => {
-						this.purviewList.push(el.id.toString())
-					})
-					//查看金华权限
-					if (this.purviewList.indexOf('10') != -1) {
-						this.$http({
-							url: this.api.readJinHuaControl_reg + '?deviceId=' + deviceId,
-							method: 'POST',
-						}).then(res => {
-							// console.log(res, 'deviceId读取所有寄存器的状态值');
-							if (res.code == 200) {
-								uni.hideLoading()
-								uni.stopPullDownRefresh();
-								this.inputData = res.data
-								for (let i = 0; i < this.itemList.length; i++) {
-									this.itemList[i].open_value = this.inputData[Number('21681') + i *
-										3]
-									this.itemList[i].close_value = this.inputData[Number('21682') + i *
-										3]
-								}
-								// console.log(this.itemList);
-
-								this.getType('21680')
-								this.getType('21683')
-								this.getType('21686')
-								this.getType('21689')
-								this.getType('21692')
-							}
-						})
-					}
-					//查看丽水权限
-					if (this.purviewList.indexOf('9') != -1) {
-						this.getControl_getState()
-						this.getReadControlliShuiControl()
-						clearInterval(this.statusInterval) && this.statusInterval
-						this.statusInterval = setInterval(() => {
-
-							this.getControl_getState()
-
-						}, 3000);
-					}
-				}))
-
-			},
-			getReadControlliShuiControl() {
-				var data = {
-					deviceId: this.deviceId
-				};
-				this.$http({
-					url: this.api.getReadControlliShuiControl,
-					data: data,
-					method: 'GET',
-				}).then((res => {
-					this.inputData2 = res.data;
-					this.openIndex = this.inputData2[21600]
-					this.getAct21601()
-				}))
-			},
-			getAct21601() {
-				this.actList1 = []
-				var num = this.inputData2['21601']
-				var num1 = this.padString(num.toString(2), 5)
-				var openListNew = []
-				openListNew = num1.split("")
-				openListNew.forEach((el, index) => {
-					this.actList1.push(openListNew[openListNew.length - index - 1])
-				})
-			},
-			getControl_getState() {
-				var data = {
-					deviceId: this.deviceId
-				};
-				this.$http({
-					url: this.api.getControl_getState,
-					data: data,
-					method: 'GET',
 				}).then(res => {
+					// console.log(res, 'deviceId读取所有寄存器的状态值');
 					if (res.code == 200) {
-						this.fanStatus.open = res.data['1023']
-						this.fanStatus.status = []
-						var num = res.data['1024']
-						var num1 = this.padString(num.toString(2), 5)
-						var openListNew = []
-						openListNew = num1.split("")
-						this.fanStatus.status = openListNew.reverse()
-						this.statusList = []
-						for (var i = 0; i < 4; i++) {
-							var statusData = {
-								name: `顶卷膜${i + 1}`,
-								open: res.data[(1025 + (i * 3))],
-								progress: res.data[(1027 + (i * 3))],
-								index: res.data[(1026 + (i * 3))]
-							}
-							this.statusList.push(statusData)
-
-
+						uni.hideLoading()
+						uni.stopPullDownRefresh();
+						this.inputData = res.data
+						for(let i=0;i<this.itemList.length;i++){
+							this.itemList[i].open_value = this.inputData[Number('21681')+i*3]
+							this.itemList[i].close_value = this.inputData[Number('21682')+i*3]
 						}
+						// console.log(this.itemList);
+						
+						this.getType('21680')
+						this.getType('21683')
+						this.getType('21686')
+						this.getType('21689')
+						this.getType('21692')
 					}
 				})
 			},
-			getNumberStatus(index) {
-				if (index == 0) {
-					return '静止状态'
-				} else if (index == 1) {
-					return '正向打开中'
-				} else if (index == 2) {
-					return '反向关闭中'
-				} else {
-					return ''
-				}
-			},
+
 			padString(str, length) {
 				return str.padStart(length, '0');
 			},
@@ -628,6 +269,7 @@
 				};
 				this.change(type, dataNum);
 			},
+
 			change(code, el) {
 				var data = {
 					equipmentId: this.deviceId,
@@ -665,7 +307,6 @@
 							title: res.msg,
 							icon: "success",
 						})
-						this.dataInit()
 					} else {
 						uni.showToast({
 							title: "失败!",
@@ -680,7 +321,7 @@
 				uni.showLoading({
 					title: '加载中...'
 				})
-
+				
 				var data = el.target.value
 				// console.log(data);
 				var sendData = {
@@ -836,313 +477,5 @@
 				}
 			}
 		}
-
-		.lishui-item {
-			width: 100%;
-			background: #FFFFFF;
-			box-shadow: 0rpx 4rpx 20rpx 0rpx rgba(153, 153, 153, 0.1);
-			border-radius: 20rpx;
-			min-height: 150rpx;
-			margin-bottom: 30rpx;
-
-			.lishui-title {
-				width: 100%;
-				padding: 0 20rpx 0 30rpx;
-				border-bottom: 1rpx solid #DDD;
-				height: 80rpx;
-				display: flex;
-				align-items: center;
-				justify-content: space-between;
-
-				.title-left {
-					font-size: 34rpx;
-					font-family: PingFang SC;
-					font-weight: bold;
-					color: #333333;
-				}
-
-				.title-right {
-					font-size: 28rpx;
-					font-family: PingFang SC;
-					font-weight: bold;
-					color: #999999;
-					display: flex;
-					align-items: center;
-
-					image {
-						margin-left: 20rpx;
-						width: 16rpx;
-						height: 8rpx;
-					}
-				}
-			}
-
-			.status-noTrue {
-				width: 100%;
-				height: 150rpx;
-				display: flex;
-				align-items: center;
-				justify-content: center;
-				font-size: 32rpx;
-				font-family: PingFang SC;
-				font-weight: bold;
-				color: #999999;
-
-				image {
-					width: 50rpx;
-					height: 50rpx;
-					margin-right: 20rpx;
-				}
-			}
-
-			.lishui-content {
-				padding: 0 30rpx;
-
-				.lishui-set {
-					width: 100%;
-					height: 100rpx;
-					border-bottom: 1rpx solid #DDD;
-					display: flex;
-					align-items: center;
-					justify-content: center;
-
-					>view {
-						padding: 0 35rpx;
-						display: flex;
-						align-items: center;
-
-						>span {
-							font-weight: bold;
-							margin-left: 20rpx;
-						}
-
-						.sel {
-							width: 40rpx;
-							height: 40rpx;
-						}
-
-						.sel-no {
-							width: 40rpx;
-							height: 40rpx;
-							background: #F5F6FA;
-							border: 2rpx solid #E1E2E6;
-							border-radius: 50%;
-							box-sizing: border-box;
-						}
-					}
-				}
-
-				.lishui-status {
-					font-size: 28rpx;
-					font-family: PingFang SC;
-					font-weight: bold;
-					color: #333333;
-					display: flex;
-					align-items: center;
-					justify-content: center;
-					padding: 35rpx 0;
-
-					span {
-						font-size: 34rpx;
-						font-family: PingFang SC;
-						font-weight: bold;
-						color: #24B383;
-						margin-left: 15rpx;
-					}
-				}
-
-				.lishui-flex {
-					display: flex;
-					align-items: center;
-
-					>view {
-						margin-right: 20rpx;
-					}
-
-					.btn {
-						width: 140px;
-						height: 66rpx;
-						display: flex;
-						align-items: center;
-						justify-content: center;
-
-						font-weight: bold;
-						padding: 0 15rpx;
-						white-space: nowrap;
-
-						&.btn-140 {
-							width: 140px;
-						}
-
-						&.btn-110 {
-							width: 110px;
-						}
-
-						&.btn-on {
-							background: linear-gradient(0deg, #54CDA4, #27B584);
-							border-radius: 10rpx;
-
-							span {
-								color: #fff;
-							}
-						}
-
-						&.btn-off {
-							background: #EFFCF7;
-							border: 2px solid rgba(58, 187, 144, 0.25);
-							border-radius: 10rpx;
-							box-sizing: border-box;
-
-							span {
-
-								color: #333333;
-							}
-						}
-					}
-				}
-
-				.model-title {
-					font-size: 28rpx;
-					font-family: PingFang SC;
-					font-weight: bold;
-					color: #333333;
-					margin-bottom: 20rpx;
-				}
-
-				.lishui-grid {
-					display: grid;
-					grid-template-columns: repeat(3, 1fr);
-					grid-row-gap: 30rpx; //纵向间隔
-					grid-column-gap: 30rpx; //横向间隔
-					padding: 30rpx 0 35rpx 0;
-
-					.btn {
-						width: 190rpx;
-						height: 66rpx;
-						display: flex;
-						align-items: center;
-						justify-content: center;
-
-						>image {
-							width: 30rpx;
-							height: 30rpx;
-
-							&.fan-img {
-								animation: rotate 5s linear infinite;
-								/* 持续时间为 5 秒，线性缓动，无限循环 */
-								/* 定义旋转动画 */
-							}
-
-							@keyframes rotate {
-								from {
-									transform: rotate(0deg);
-								}
-
-								to {
-									transform: rotate(360deg);
-								}
-							}
-						}
-
-						span {
-							margin-left: 10rpx;
-						}
-
-						&.btn-on {
-							background: linear-gradient(0deg, #54CDA4, #27B584);
-							border-radius: 10rpx;
-
-							span {
-								color: #fff;
-							}
-						}
-
-						&.btn-off {
-							background: #EFFCF7;
-							border: 2px solid rgba(58, 187, 144, 0.25);
-							border-radius: 10rpx;
-							box-sizing: border-box;
-
-							span {
-
-								font-weight: bold;
-								color: #333333;
-							}
-						}
-					}
-				}
-			}
-		}
-
-		/deep/.u-mode-center-box {
-			background-color: transparent;
-		}
-
-		.contentPop {
-			width: 100%;
-			min-height: calc(100% - 70rpx);
-			position: relative;
-
-			.contentPop_box {
-				width: 100%;
-				height: 100%;
-				background-color: #fff;
-				border-radius: 20rpx;
-				padding-bottom: 30rpx;
-
-				.title {
-					width: 100%;
-					height: 91rpx;
-					font-size: 34rpx;
-					font-family: PingFang SC;
-					font-weight: bold;
-					color: #333333;
-					border-bottom: 1rpx solid #DDDDDD;
-					text-align: center;
-					line-height: 91rpx;
-				}
-
-			}
-
-			>image {
-				width: 50rpx;
-				height: 50rpx;
-				position: absolute;
-				bottom: -70rpx;
-				left: 50%;
-				transform: translate(-50%);
-			}
-
-			.padding-none {
-				padding: unset !important;
-			}
-
-			.lishui-content {
-				.lishui-set {
-					padding: unset;
-
-					>view {
-						padding: 0 15rpx;
-
-						span {
-							margin-left: 10rpx;
-						}
-					}
-				}
-
-				.lishui-grid {
-					padding: 0rpx 30rpx 30rpx;
-
-					>view {
-						width: 175rpx !important;
-
-						span {
-							margin-left: 0;
-						}
-					}
-
-				}
-			}
-		}
 	}
 </style>

pages/greenhouseDevice/greenhouseDevice.vue

@@ -7,7 +7,7 @@
 			<view class="item" v-for="item,index in deviceList" :key="index" v-if="item.equipmentName==10">
 				<image src="../../static/greenhouseDevice.png" mode=""></image>
 				<view class="center">
-					<text>{{item.equipmentName==10 ? item.deviceTypeName : ''}}</text>
+					<text>{{item.equipmentName==10 ? item.equipmentStatu+'#'+item.deviceTypeName : ''}}</text>
 					<text
 						:class="item.deviceState == 1 ? 'state' : 'state_act'">{{ item.deviceState == 1 ? "在线" : "离线"}}</text>
 				</view>
@@ -28,8 +28,7 @@
 				background: {
 					backgroundColor: '#24B383',
 				},
-				deviceList: [],
-				timer:null,
+				deviceList: []
 			};
 		},
 		onLoad() {
@@ -43,14 +42,7 @@
 					that.getEquipmentInfo(uni.getStorageSync('userid'))
 				}
 			})
-			
-		},
-		onHide() {
-			clearInterval(this.timer)&&this.timer
-		},
-		onShow() {
-				const that = this
-			this.timer=setInterval(function() {
+			setInterval(function() {
 				uni.getStorage({
 					key: 'token',
 					success: function(res) {

pages/preciseWaterAndFertilizer/preciseWaterAndFertilizer.vue

@@ -4,7 +4,7 @@
 			title-color='#FFFFFF' :title-bold='true' title-size='32'></u-navbar>
 
 		<view class="content">
-			<view class="item" v-for="item,index in deviceList" :key="index" v-if="item.equipmentName==1">
+			<view class="item" v-for="item,index in deviceList" :key="index">
 				<image src="../../static/icon_precise.png" mode=""></image>
 				<view class="center">
 					<text>{{item.deviceTypeName}}</text>

pages/target_water_fertilizer_PH/target_water_fertilizer_PH.vue

@@ -90,7 +90,6 @@
 				valuePHList: [],
 				newValuePHList: [],
 				unit: '',
-				equipmentName:'',
 
 				titleName: '',
 				echartName: ''
@@ -116,9 +115,6 @@
 				this.unit = option.unit
 				this.opts.yAxis.data[0].title = option.unit
 			}
-			if(option.equipmentName){
-				this.equipmentName = option.equipmentName
-			}
 
 			this.titleName = this.getStatus(option.equipmentNumber, option.targetValue)
 		},
@@ -145,7 +141,7 @@
 			// 获取折线图数据
 			getEchartsData() {
 				this.$http({
-					url: (this.equipmentName == 1 ? this.api.chart_fsdata : this.api.getcontrol_fsdata) + '?equipmentId=' + this.equipmentId,
+					url: this.api.chart_fsdata + '?equipmentId=' + this.equipmentId,
 					method: 'POST'
 				}).then(res => {
 					// console.log(res, '获取折线图数据');

pages/timeEnvironment/timeEnvironment.vue

@@ -24,20 +24,16 @@
 				欢迎使用温室智慧云数据统计
 			</view>
 
-			<view class="waterAndFertilizerParams" v-for="(item1,index1) in waterAndFertilizerParamsList" :key="index1">
+			<view class="waterAndFertilizerParams" v-for="(item1,index1) in waterAndFertilizerParamsList" :key="index1" v-if="item1.equipmentName==1">
 				<view class="nav">
 					<image src="../../static/PH.png" mode=""></image>
 					<text>{{ item1.deviceTypeName }}</text>
 				</view>
 				<view class="detail">
-					<view class="item" v-for="(item2,index2) in item1.childList" :key="index2"
-						@click="toTarget_water_fertilizer_PH(item2.equipmentId,item2.environmentData,item2.environmentDataId,item2.equipmentNumber,item2.targetValue,getTypeList(item2.formula),item2.equipmentName)">
-						<!-- <image :src='`../../static/icon/icon${ (index2 + 1) < 9 ? (index2 + 1) : 1 }.png`' mode=""></image> -->
-						<image :src="`../../static/icon_new/icon${ item2.formula }.png`" mode=""></image>
+					<view class="item" v-for="(item2,index2) in item1.childList" :key="index2" @click="toTarget_water_fertilizer_PH(item2.equipmentId,item2.environmentData,item2.environmentDataId,item2.equipmentNumber,item2.targetValue,getTypeList(item2.formula))">
+						<image :src='`../../static/icon/icon${ (index2 + 1) < 9 ? (index2 + 1) : 1 }.png`' mode=""></image>
 						<view class="info">
-							<view class="">
-								{{ getStatus(item2.equipmentNumber,item2.targetValue) + item2.environmentDataId }}
-							</view>
+							<view class="">{{ getStatus(item2.equipmentNumber,item2.targetValue) + item2.environmentDataId }}</view>
 							<view class="">{{ item2.environmentData + getTypeList(item2.formula) }}</view>
 						</view>
 					</view>
@@ -90,7 +86,7 @@
 				},
 				// 水肥参数
 				waterAndFertilizerParamsList: [
-
+					
 				],
 
 				// 测试基地
@@ -193,18 +189,77 @@
 						value: "4%"
 					},
 				],
-
-
+				
+				
 				//label是名称  value是code码  
 				//countType计算类型 0是原数据 1是原数据-400 2是原数据/10 3是(原数据-400) / 10
-				typeList: [],
-
-				timer: null,
-				updateTime: ''
+				typeList: [
+					{ label: '无意义的传感器', value: 0, countType: 0 },
+					{ label: '空气温度', value: 1, countType: 3,unit: '℃' },
+					{ label: '空气湿度', value: 2, countType: 2,unit: '%' },
+					{ label: '光亮度', value: 3, countType: 2,unit: 'Klux' },
+					{ label: '二氧化碳', value: 4, countType: 0,unit: 'ppm' },
+					{ label: '土壤温度', value: 5, countType: 3,unit: '℃' },
+					{ label: '土壤湿度', value: 6, countType: 2,unit: '%' },
+					{ label: '水温', value: 7, countType: 3,unit: '℃' },
+					{ label: '水肥PH', value: 8, countType: 2,unit: '' },
+					{ label: '水肥EC', value: 9, countType: 2,unit: 'mS/cm' },
+					{ label: '压差', value: 10, countType: 0,unit: 'Pa' },
+					{ label: '风速', value: 11, countType: 2,unit: 'm/s' },
+					{ label: '风向', value: 12, countType: 0,unit: '°' },
+					{ label: '雨雪信号', value: 13, countType: 0,unit: '' },
+					{ label: '降雨量', value: 14, countType: 2,unit: 'mm' },
+					{ label: '光合有效辐射', value: 15, countType: 2,unit: 'umol/m2.s' },
+					{ label: '太阳总辐射', value: 16, countType: 0,unit: 'W/m2' },
+					{ label: '流量', value: 17, countType: 0,unit: 'L/H' },
+					{ label: '大气压强', value: 18, countType: 2,unit: 'KPa' },
+					{ label: '土壤PH', value: 19, countType: 2,unit: '' },
+					{ label: '土壤EC', value: 20, countType: 0,unit: 'uS/cm' },
+					{ label: '叶面温度', value: 21, countType: 3,unit: '℃'},
+					{ label: '叶面湿度', value: 22, countType: 2,unit: '%' },
+					{ label: '果实直径', value: 23, countType: 0,unit: 'mm' },
+					{ label: '茎秆直径', value: 24, countType: 0,unit: 'mm' },
+					{ label: '流速', value: 25, countType: 2,unit: 'm/s' },
+					{ label: '瞬时流量', value: 26, countType: 2,unit: 'm3' },
+					{ label: '当日流量', value: 27, countType: 2,unit: 'T' },
+					{ label: '累计流量', value: 28, countType: 0,unit: 'T' },
+					{ label: '无线气象站电池电压', value: 29, countType: 2,unit: 'V' },
+					{ label: '无线气象站无线信号强度', value: 30, countType: 1,unit: 'dBm' },
+					{ label: '无线气象站信噪比（SNR）', value: 31, countType: 1,unit: 'dB' },
+					{ label: 'PM1.0', value: 32, countType: 0,unit: 'μg/m2' },
+					{ label: 'PM2.5', value: 33, countType: 0,unit: 'μg/m2' },
+					{ label: 'PM10', value: 34, countType: 0,unit: 'μg/m2' },
+					{ label: '紫外辐射', value: 35, countType: 0,unit: 'W/m2' },
+					{ label: '蒸发量', value: 36, countType: 2,unit: 'mm' },
+					{ label: '负氧离子', value: 37, countType: 0,unit: '个/cm3' },
+					{ label: '露点温度', value: 38, countType: 3,unit: '℃'},
+					{ label: '设备电压', value: 39, countType: 2,unit: 'V' },
+					{ label: '设备电流', value: 40, countType: 2,unit: 'A' },
+					{ label: '土壤氮含量', value: 41, countType: 0,unit: 'mg/kg' },
+					{ label: '土壤磷含量', value: 42, countType: 0,unit: 'mg/kg' },
+					{ label: '土壤钾含量', value: 43, countType: 0,unit: 'mg/kg' },
+					{ label: '管道压力', value: 44, countType: 0,unit: 'Kpa' },
+					{ label: '一氧化碳', value: 45, countType: 0,unit: 'ppm' },
+					{ label: '氨气', value: 46, countType: 0,unit: 'ppm' },
+					{ label: '硫化氢', value: 47, countType: 0,unit: 'ppm' },
+					{ label: '氧气', value: 48, countType: 2,unit: '%vol' },
+					{ label: '甲烷', value: 49, countType: 2,unit: '%vol' },
+					{ label: '铜（CU）', value: 50, countType: 0,unit: 'mg/kg' },
+					{ label: '镉（CD）', value: 51, countType: 2,unit: 'mg/kg' },
+					{ label: '铅（PB）', value: 52, countType: 0,unit: 'mg/kg' },
+					{ label: '噪声', value: 53, countType: 0,unit: 'dB' },
+					{ label: '叶面面积', value: 54, countType: 0,unit: 'mm' },
+					{ label: '虫数量', value: 55, countType: 0,unit: '个' },
+					{ label: '无线传感器电池电压', value: 56, countType: 2,unit: 'V' },
+					{ label: '无线传感器无线信号强度', value: 57, countType: 1,unit: 'dBm' },
+					{ label: '无线传感器信噪比（SNR）', value: 58, countType: 1,unit: 'dB' },
+				],
+			
+				timer:null,
+				updateTime:''
 			}
 		},
 		onLoad() {
-			this.typeList=this.api.typeList
 			uni.showLoading({
 				title: '加载中...'
 			});
@@ -219,7 +274,7 @@
 				// 		url:'/pages/login/login'
 				// 	})
 				// }
-			})
+			})	
 			this.timer = setInterval(function() {
 				uni.getStorage({
 					key: 'token',
@@ -231,7 +286,7 @@
 					// 		url:'/pages/login/login'
 					// 	})
 					// }
-				})
+				})		
 			}, 60000);
 		},
 		onUnload() {
@@ -242,7 +297,7 @@
 			uni.showLoading({
 				title: '加载中...'
 			});
-			let that = this
+		    let that = this
 			uni.getStorage({
 				key: 'token',
 				success: function(res) {
@@ -253,7 +308,7 @@
 				// 		url:'/pages/login/login'
 				// 	})
 				// }
-			})
+			})	
 		},
 		mounted() {
 			uni.showLoading({
@@ -265,9 +320,9 @@
 				success: function(res) {
 					that.getEquipmentInfo(uni.getStorageSync('userid'))
 				},
-				fail: function(err) {
+				fail:function(err){
 					uni.reLaunch({
-						url: '/pages/login/login'
+						url:'/pages/login/login'
 					})
 				}
 			})
@@ -285,70 +340,69 @@
 				}).then(res => {
 					// console.log(res, '根据用户id查询对应的设备数据');
 					if (res.code == 200) {
-
-						this.waterAndFertilizerParamsList = res.data.map((item, index) => {
+						
+						this.waterAndFertilizerParamsList = res.data.map((item,index)=>{
 							return {
 								...item,
-								childList: []
+								childList:[]
 							}
 						})
-						this.waterAndFertilizerParamsList.forEach((i, index) => {
-							
+						this.waterAndFertilizerParamsList.forEach((i,index)=>{
+							console.log(i.deviceId,'i.deviceId');
+							if(i.deviceId == 2023042214250018) return
 							this.$http({
-								url: (i.equipmentName == 1 ? this.api.getFs_rtdata : this.api.getcontrol_rtdata) + "?equipmentId=" + i.deviceId,
+								url: this.api.getFs_rtdata + "?equipmentId=" + i.deviceId,
 								method: 'post',
 							}).then(res => {
 								// console.log(res, '主页查看施肥机实时数据');
-
-								if (res.code == 200) {
+								
+								if(res.code == 200){
 									uni.hideLoading({
 										title: '完成'
 									});
 									uni.stopPullDownRefresh();
-									i.childList = res.data;
+									i.childList= res.data;
 									this.updateTime = res.data[0].updateTime
 									// console.log(this.waterAndFertilizerParamsList);
-								} else {
-
+								}else{
+									
 								}
-							}).catch(err => {
+							}).catch(err=>{
 								console.log('接口失败');
 							})
 						})
-
+						
 					}
 				})
 			},
-
+			
 			// 跳转到折线图
-			toTarget_water_fertilizer_PH(id, data, name, equipmentNumber, targetValue, unit,equipmentName) {
+			toTarget_water_fertilizer_PH(id,data,name,equipmentNumber,targetValue,unit){
 				uni.navigateTo({
-					url: '/pages/target_water_fertilizer_PH/target_water_fertilizer_PH?id=' + id + '&data=' +
-						data + '&name=' + name + '&equipmentNumber=' + equipmentNumber + '&targetValue=' +
-						targetValue + '&unit=' + unit + '&equipmentName=' + equipmentName
+					url:'/pages/target_water_fertilizer_PH/target_water_fertilizer_PH?id=' + id + '&data=' + data + '&name=' + name + '&equipmentNumber=' + equipmentNumber + '&targetValue=' + targetValue + '&unit=' + unit
 				})
 			},
-
-
-
+			
+			
+			
 			// 数据单位
-			getTypeList(val) {
+			getTypeList(val){
 				let typeList1 = []
-				typeList1 = this.typeList.filter(item => {
-					return item.value == val
+				typeList1 = this.typeList.filter(item=> {
+				   return item.value == val
 				})
 				return typeList1[0].unit
 			},
-
+			
 			// 判断是否是平均或者目标,或者是1#
-			getStatus(equipmentNumber, targetValue) {
-				if (targetValue == 1) {
+			getStatus(equipmentNumber,targetValue){
+				if(targetValue == 1){
 					return '目标'
-				} else if (targetValue == 0 && equipmentNumber == 0) {
+				}else if(targetValue == 0 && equipmentNumber == 0){
 					return '1#平均'
-				} else if (targetValue == 0 && equipmentNumber == 15) {
+				}else if(targetValue == 0 && equipmentNumber == 15){
 					return '2#平均'
-				} else if (targetValue == 0 && equipmentNumber != 0 && equipmentNumber != 15) {
+				}else if(targetValue == 0 && equipmentNumber != 0 && equipmentNumber != 15){
 					return equipmentNumber + '#'
 				}
 			}
@@ -493,8 +547,7 @@
 						}
 					}
 				}
-
-				.updateTime {
+				.updateTime{
 					width: 100%;
 					display: flex;
 					justify-content: space-between;

project.config.json

@@ -25,5 +25,5 @@
     "ignore": [],
     "include": []
   },
-  "appid": "wx0518521f67048cc8"
+  "appid": "wx05b45a2699f02a2b"
 }